Download links - Manual
The current status of the solar panels, as well as a 30-days historical data, can be checked from a mobile phone or a tablet. To do this, you would need to connect directly to the solar charger using a Bluetooth connection.
|
Droids from 2022 onwards 1 solar charger, located in the left-back side of the main electrical board. This implies that, from the App, you would be able to monitor the overall values for all the 4 solar panels. |
2 solar chargers, located in the left-back and right-back sides of the main electrical board. This implies that, from the App, you would be able to monitor the values for 2 solar panels (left or right) at the time. |
 |
 |
1) First of all, download the Victron app for your device and install it.
 |
VictronConnect - APPLE |
 |
VictronConnect - ANDROID |
2) Before connecting to the solar chargers:
- Turn on the droid, then turn on the solar panels
- Activate the Bluetooth on your device and be within reach from the droid
3) Open the VicronConnect app and tap on the charger to which you want to connect to. The PIN code to connect to the charger is "000000" (six times zero) and should not be changed.
TIPS AND TRICKS 😉👍
If you are in doubt about which is the correct charger you want to connect to, you can find the serial number on the side of the charger itself, as shown in the image below.
4) from the app, you would be able to monitor:
| Current status | 30-days historical data | Trends |
 |
 |
 |
For further information about the possibilities in the App, please have a look directly to the App manual: