Skip to content
Go to Customer Portal
Contact us
  • There are no suggestions because the search field is empty.

UPG14 v2.0-v2.4 Ethernet Cables Replacement

Replace Ethernet Cables Inside the Robot

To replace the Ethernet cables inside the robot, download and follow the multilingual step-by-step guide:

🔗 Replace Ethernet Cables in the Robot

Before you begin, make sure you have the following replacement cables available:

  • 1 × 790347-01 - Ethernet cable, 0.5 m
  • 3 × 790358-01 - Ethernet cable, 0.25 m

Replace the Ethernet Cable in the Base Station

To replace the Ethernet cable in the base station, download and follow the multilingual guide:

🔗 Replace Ethernet Cable in the Base Station

Before starting the replacement, ensure you have:

  • 1 × 790347-01 - Ethernet cable, 0.5 m

Before You Start

  • Review the guide completely before beginning the replacement procedure.
  • Verify that you have all required parts available.
  • Follow all safety instructions included in the guide.

If you encounter any issues during the replacement process, please contact Customer Support for further assistance.