Quick guide on how to configure a new field

Below are some useful bullet points 

• In the HMI go to PAGE 3.3 - FIELD SETTINGS
• Set the numbers of Headlands you need
• Set Seed valve to Open or Closed
• Set the distance between seeds
• Chose sowing pattern
• Go to Field Settings Advanced

• Choose the direction for the robot’s first pass, Odd or Even
• Choose the direction for robot operation in the headland
• Set the Safety zone. Default is 1.2 meters
• Confirm Seeding Overlap and Weeding Overlap
• Go to DEAD BED to enable or disable dead beds within the field if needed