Quick guide on how to create a new field

Setting up a new field is straightforward when you follow each step carefully. 

• Mount the droid on the field bracket to transport it across the field.

• Confirm that the robot is receiving a FIXED RTK signal.

• From the main HMI screen, swipe right to page 3 labelled "Field Setup"
• In the drop-down menu choose an empty field slot.
• Click on "Create new field".
• Click on the "?" (question mark) icon, then enter the new field name.
• Move the robot to the first corner point of the field and save its location.
• Click "Set Reference".
• Continue outlining the field by moving the droid to each desired corner and saving each point, until the entire field perimeter is complete.
• Set the reference line, the main AB line, which determines the robot’s driving direction.
• Then proceed by pressing the arrow in the top-right corner.
• Review, and click "Save field".